Apple Macintosh PowerBook 190 Series - Manual (Page 17)

If you are a new Macintosh PowerBook user, follow the instructions in the
rest of this section. If you have experience using a Macintosh computer, skip
to “Making Software Disks” later in this chapter to learn how to make floppy
disks of the software installed on your computer.
If you are a new Macintosh PowerBook user
If you have never used a Macintosh PowerBook computer, you need to learn
how to use your computer before you can make your disks. Follow these
steps:
1 Move your finger on the trackpad to move the arrow pointer (
8
) on the screen.
Place your index finger on the trackpad and your thumb on the trackpad
button. Don’t press the trackpad button yet.
2 Move your finger on the trackpad so that the tip of the arrow (
8
) is inside the Quit button
at the bottom of the Floppy Disk Maker box.
3 Being careful not to move your finger on the trackpad, press and release the trackpad
button.
The following screen replaces the Floppy Disk Maker box.
Note: Your screen should look very similar to this, but it may not look exactly
the same.
7 Getting Started