Apple Macintosh PowerBook 190 Series - Manual (Page 126)

3 When Disk First Aid has finished checking your hard disk, choose Quit from the
File menu.
4 Open the Drive Setup program.
You use the Drive Setup program to update your hard disk.
5 In the list of drives, click your startup disk.
6 Choose Update Driver from the Functions menu.
The Update Driver command will not affect the contents of your startup disk.
7 When the update process is finished, quit Drive Setup.
8 Shut down your computer.
9 Start up your computer from the first system software installation disk that you made
with the Floppy Disk Maker application.
The Installer’s Welcome screen appears. You may have to double-click the
System Software Installer icon to open the Installer program.
10 Click OK.
The Easy Install dialog box appears. (The dialog box that appears on your
screen may look slightly different than this one.)
119 Diagnostic Techniques
Disk on which
system software
will be installed
For a clean installation,
DO NOT click the
Install button.
If you need to install on a
different disk, click this button.