Apple Macintosh PowerBook 190 Series - Manual (Page 55)

If you can’t eject a card
If you are unable to eject a card using any of the methods described, follow
these steps:
1 Shut down the computer.
2 Straighten one end of a paper clip.
3 Insert the end of the straightened paper clip into the hole next to the slot that contains
the card, and press gently but firmly until the card is ejected.
4 Pull the card out of the slot.
If you can’t eject a card, insert
the end of a straightened paper
clip into the hole next to the slot.
This hole is for the upper slot.
This hole is for the lower slot.
45 Using Expansion Bay Modules and PC Cards