J.P. Instruments EDM 700/800/711 Pilots Guide - Manual (Page 45)

For Your Safe Flight Page 41
STEP LF Comments
TIME 2 500 Record time interval, in seconds
MNTH I  I2 Month
DAY I  3I Day
YEAR 80  79 Year (note: represents 1980 through 2079)
HOUR OO  23 24 hour time. We suggest you set Zulu time
MIN OO  59 This also zeros the seconds
N----- N
I23456
Current Aircraft ID. To change Aircraft ID, hold both
STEP and LF buttons until the first character flashes.
LF selects the first character. STEP moves to the next
character. To Save, hold both STEP and LF for 5 sec.
END Y Tap STEP button to exit the procedure.
Section 13 - EDM-711 Primary Alarm Display
The EDM-711—There are 3 primary
functions available to your EDM-
700/800 CHT, OIL and TIT. When an
EDM-700-800 has primary functions it is
called an EDM-711. A Remote alarm
lamp is supplied that will function even
when the primary display fails. Each lamp is a dual lamp Red/Yellow.
The lamp will light when the indicated temperature exceeds alarm limit.
The limits for these alarms and warnings are preset by the factory for
your type of aircraft and can only be changed at the factory. The yellow
warnings are set as follows: CHT 45°F below redline, OIL 25°F below
redline, and TIT 100°F below redline.
Tapping STEP will extinguish the flashing digital display but the
remote yellow/red warning indication cannot be extinguished.
In the procedure in the next section to change the alarm limits, you will
not be able to change the limits for CHT, OIL or TIT.
R/Y
460F 230F 1650F
Engine Temperature Limit
CHT OIL TIT
R/Y R/Y R/Y