J.P. Instruments EDM 700/800/711 Pilots Guide User Manual
Page 41
For Your Safe Flight
Page 37
yellow. Both the EDM and factory original gauge may be used
concurrently. Due to the high input impedance of the EDM instrument, it
will not affect the accuracy of the factory installed probe or gauge.
In normal cruise flight, record the difference between the factory
installed TIT gauge and the EDM TIT reading.
TIT gauge ________ EDM ________.
If you haven’t already done so, start the pilot programming procedure,
by simultaneously holding the STEP and LF buttons for five seconds.
You will see the word
PROGRAM for two seconds.