J.P. Instruments EDM 700/800/711 Pilots Guide - Manual (Page 35)

For Your Safe Flight Page 31
At power on, the EDM will execute its self test and then display the date
(e.g.,
I I.I2.0 I), the time (I3.26), the percentage of memory filled since the
last save ( FULL 24), and the Aircraft ID.
Downloading from Long Term Memory
To download data from the long term memory to your laptop PC, do the
following steps.
1. Connect the data cable between the PC serial port and the EDM
data port connector mounted on your instrument panel.
2. Run the EzPlot program on the PC.
3. On the EDM hold both STEP and LF for five seconds.
4. Tap STEP a number of times until you see DUMP? N.
5. Tap LF to select NEW data or ALL data.
6. Click on the Start button on the PC.
7. Wait 2 seconds and tap STEP on the EDM.
At the completion of the download, you can plot the data. Refer to the
EzPlot program and documentation.
Downloading Data from the EDM to a Flash Drive
Using the Accessory USB Memory Box