Check auxiliary engine, Verify all gauges are in working order, Operate pump controls – Hale SMR User Manual
Page 57: Inspect water and foam tanks, Check roof and bumper turrets, Check auxiliary fire suppression equipment, Monthly
Stainless Max Series Pumps
4-5
Preventive Maintenance
Check Auxiliary Engine
If the pump is powered by a separate engine, check the engine, fuel
tanks and drive for wear and proper operation.
Verify All Gauges are in Working Order
Any gauge that is repeated in the cab or another panel, must agree
with the gauge on the operator's panel.
Gauges not reading within 10% of the calibrated test gauge must be
removed from service and re-calibrated.
Operate Pump Controls
Operate the pump drive controls to verify the pump engages.
Verify the indicator lights work properly.
Inspect Water and Foam Tanks
Visually inspect water and foam tanks for proper level and gauge
readings.
If any debris is present, flush the tanks to protect the pump from
wear caused by dirty water or foam concentrate.
Check Roof and Bumper Turrets
If the apparatus is so equipped, verify that the turrets function
properly, and no leaks are present. Make repairs immediately.
Check Auxiliary Fire Suppression Equipment
Visually inspect all piping and valves on the pump and auxiliary
equipment for corrosion or damage.
MONTHLY
❑
Check the Gearbox Oil
❑
Perform the dry vacuum test
❑
Check the drive line bolts