Brother HL 5370DW - Manual (Page 93)

Wireless Configuration for Macintosh using the Brother installer application (For HL-5370DW)
83
5
Note
• If the list is blank, check if the machine is within range for wireless communication. Then, click Refresh.
• If your target Ad-hoc network does not appear on the list, you can manually add it by clicking the Add
button. Check This is an Ad-hoc network and there is no access point., and then enter the Name
(SSID) and the Channel number, and then click Next.
o If your network is not configured for Authentication and Encryption, the following screen will appear. To
continue configuration, click OK and go to q.