Brother HL 5370DW - Manual (Page 127)

Control panel features
117
8
Printing the Printer Settings Page
8
Note
Node name: Node name appears on the Printer Settings Page. The default node name of the print server
in the machine is “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network
(For HL-5370DW).
The Printer Settings Page prints a report listing all the current printer settings including the network settings.
For HL-5350DN and HL-5370DW
8
You can print the Printer Settings Page using Go of the machine.
a Make sure that the front cover is closed and the power cord is plugged in.
b Turn on the machine and wait until the machine is in the Ready state.
c Press Go three times within 2 seconds. The machine will print the current Printer Settings Page.
Note
If the IP Address on the Printer Settings Page shows 0.0.0.0, wait for one minute and try again.
For HL-5380DN
8
You can print the Printer Settings Page using the control panel.
a Press any of the Menu buttons (+, -, Set or Back) of the control panel on your machine.
b
Press + or - to choose INFORMATION.
Press Set.
c Press + or - to choose PRINT SETTINGS.
Press Set.
Note
If the IP Address on the Printer Settings Page shows 0.0.0.0, wait for one minute and try again.