Brother HL 5370DW User Manual
Page 183
Troubleshooting
173
15
3 Double-click the Terminal icon.
4 Try pinging the print server from the Terminal window:
ping ipaddress
Where ipaddress is the print server IP address (note that in some instances it can take up to two
minutes for the print server to load its IP address after setting the IP address).
e
If you have tried a to d above and it does not work, then reset the print server back to its factory default
settings and try from the initial setup again. For resetting, see Reset the network settings to the factory
f
If the installation failed, the Firewall on your computer may be blocking the necessary network
connection to the machine. In this case, you will need to disable the Firewall on your computer and
re-install the drivers. For more information, see General problems on page 169. If you are using personal
Firewall software, see the User’s Guide for your software or contact the software manufacturer.