Brother HL 5370DW - Manual (Page 124)

Control panel features
114
8
IP BOOT TRIES
8
This field displays how many times the printer attempts to scan the network to obtain the IP address through
the BOOT METHOD you have set (see BOOT METHOD on page 111). The default setting is 3.
a Press any of the Menu buttons (+, -, Set or Back) of the control panel on your machine.
b Press + or - to choose NETWORK.
Press Set.
c Press + or - to choose TCP/IP.
Press Set.
d
Press + or - to choose IP BOOT TRIES.
Press Set.
e Press + or - to set the number of times you wish to try to obtain the IP address.
Press Set.
APIPA
8
The setting of ON will cause the print server to automatically allocate a Link-Local IP address in the range
(169.254.1.0 - 169.254.254.255) when the print server cannot obtain an IP address through the Boot Method
you have set (see BOOT METHOD on page 111). Choosing OFF means the IP address doesn’t change,
when the print server cannot obtain an IP address through the Boot Method you have set. The default setting
for APIPA is ON.
a Press any of the Menu buttons (+, -, Set or Back) of the control panel on your machine.
b
Press + or - to choose NETWORK.
Press Set.
c Press + or - to choose TCP/IP.
Press Set.
d
Press + or - to choose APIPA.
Press Set.
e Press + or - to choose ON or OFF.
Press Set.