Brother HL 5370DW - Manual (Page 50)

Wireless configuration for Windows ® using the Brother automatic installer application (For HL-5370DW)
40
4
Configuration using the automatic wireless (one-push)
method
4
If your wireless access point/router supports either SecureEasySetup™, Wi-Fi Protected Setup (PBC
1
) or
AOSS™, you can configure the machine easily without knowing your wireless network settings. Your Brother
machine has one-push wireless setting mode. This feature automatically detects which mode your access
point uses for one-push configuration (SecureEasySetup™, Wi-Fi Protected Setup or AOSS™). By pushing
a button on the wireless access point/router and the machine, you can setup the wireless network and
security settings. See the user’s guide for your wireless access point/router for instructions on how to access
one-push mode.
1 Push Button Configuration
Note
Routers or access points that support SecureEasySetup™, Wi-Fi Protected Setup or AOSS™ have the
symbols shown below.
Before configuring the wireless settings
4
IMPORTANT
The following instructions will install your Brother machine in a network environment using the Brother
installer application for Windows
®
found on the CD-ROM we have provided with the machine.
If you are going to connect your Brother machine to your network, we recommend that you contact your
system administrator prior to installation.
If you have previously configured the wireless settings of the printer, you must reset the print server back
to its factory default settings (see Reset the network settings to the factory default on page 118).
If you are using Windows
®
Firewall or a firewall function of anti-spyware or antivirus applications,
temporarily disable them. Once you are sure that you can print, configure the software settings following
the instructions.