Brother HL 5370DW - Manual (Page 79)

Wireless Configuration for Macintosh using the Brother installer application (For HL-5370DW)
69
5
p Check the printed Network Configuration page. Choose the status as it is shown for the Wireless Link
Status on the Network Configuration page. Click Next.
If your status is "Link OK.", go to r.
If your status is "Failed To Associate", go to q.
q Click Finish. Wireless setup was unable to associate with a wireless network. This is probably due to
incorrect security settings. Reset the print server back to its factory default settings (see Reset the
network settings to the factory default on page 118). Confirm the security settings of your wireless
network and try starting from f again.