Brother FAX-8350P - Manual (Page 82)

72
C H A P T E R S E V E N
6 Press Set . The screen prompts you to select the type of number this
is. Use or to select the type you want.
FAX a fax only number
TEL a telephone (voice) number
F/T both a fax and telephone (voice) number
7 Press Set .
8 Return to Step 2 to store another One Touch Dial number. —OR—
Press
Stop to exit.
When you dial a One Touch Dial number, the screen displays the name
you’ve stored, or, if you haven’t stored a name, the number you’ve
stored.
■ One Touch key no. 32 might be registered with your dealer’s
telephone/fax no. for use with the order form (See chap. 10).
■ User can change the name and Fax number of One Touch key no.
32. In this case, the registered name and Fax number are put on the
order sheet. (See “Order Form” chap. 10)
Storing Speed Dial Numbers
You can store Speed Dial numbers, which you dial by pressing only three
keys. There are 100 Speed Dial locations. Even if you lose electrical
power, numbers stored in memory will not be lost.
1 For the FAX-8350P, Press Menu , 6 , 2 .
For the MFC-9650/FAX-8750P, Press Menu , 1 , 6 , 2 .
The screen prompts you to enter a location.
SPEED-DIAL? #
ENTER & SET
2 Use the dial pad to enter a two-digit location (00–99).
3 Press Set . The screen displays your entry, then prompts you to enter
the number you’re storing.
#05:
ENTER & SET
4 Enter the number (up to 20 digits).
5 Press Set . The screen now prompts you to store a name with this
number.
NAME:
ENTER & SET
See
“Speed
Dialling”
chap. 8