Brother FAX-8350P - Manual (Page 48)

38
C H A P T E R F O U R
Using Memory Security
You must use a password to switch Memory Security ON and OFF.
Setting Up Memory Security for the First Time
1 Press Menu , 0 , 2 , or press Security .
The screen prompts you to enter the password, and then press Set .
NEW PASSWD:XXXX
ENTER & SET
2 Enter a 4-digit number as a password.
3 Press Set .
The screen prompts you re-enter the password.
VERIFY:XXXX
ENTER & SET
4 Re-enter the password and press Set .
5 The screen displays
SET SECURITY
SELECT { } & SET
SET PASSWORD
SELECT { } & SET
6 Press or to choose SET SECURITY.
7 Press Set . The screen prompts you to enter the password.
PASSWORD:XXXX
ENTER & SET
8 Enter a 4-digit password, followed by Set .
This is the same as the security password of your machine already
stored.
The screen displays ACCEPTED for 2 seconds, followed by SECURE
MODE - Memory Security is now switched ON.
If the password you enter at Step 8 is incorrect, the screen would display
WRONG PASSWORD. After 2 seconds the display will then return to
normal (displaying the date & time). You must then start from Step 5 to
set Memory Security.