Brother FAX-8350P - Manual (Page 169)

159
T R O U B L E S H O O T I N G A N D M A I N T E N A N C E
Follow these steps to replace the drum unit:
1 Open the front cover.
2 Remove the old drum unit. Place the drum unit on a drop cloth or
large piece of disposable paper to avoid spilling and scattering the
toner.
3 Pull the toner cartridge out of the drum unit assembly while holding
down the lock lever with your right hand. For more information, see
“Replacing the Toner Cartridge” in this chapter.
Lock Lever
Discard the used drum unit according to local regulations. Be sure to seal
the drum unit tightly so toner powder does not spill out of the unit. When
discarding used drum units, keep them separate from domestic rubbish.