Brother FAX-8350P - Manual (Page 185)

175
Using Remote Access Code
1 Dial your machine phone number from a
touch tone phone.
2 Enter your Remote Control Access Code
(159 ) after the beep.
3 Your machine signals the kinds of messages
received:
1 long beep — Fax message(s)
No beeps — no messages
4 After 2 short beeps, enter a command.
5 Press 9 0 to reset your machine when you
finish.
6 Hang up.
4
Change Answer Mode
Press 9 8
then for TAD, press 1 .
Fax/Tel (F/T), press 2 .
Fax, press 3 .
Exit Remote Operation
Press 9 0 .
Change Remote Access Code
1 For the FAX-8350P, Press Menu , 8 , 3 .
For the MFC-9650/FAX-8750P, Press Menu ,
1 , 8 , 3 .
2 Enter the 3-digit number. The cannot be
used.
3 Press Set .
4 Press Stop to exit. 1
R
EMOTE
C
ONTROL
A
CCESS
C
ARD