Brother FAX-8350P - Manual (Page 77)

67
S E T U P S E N D
5 Press Help/Broadcast or Broadcast .
6 Enter the next fax number.
Example: Manual dialling, using the dial pad.
7 Press Start .
Your machine will read the documents into memory and then start
sending faxes to all the numbers you entered.
■ To stop the broadcasting in progress, press Stop . The display asks if
you want to cancel all locations or just the location that is being sent
to.
■ Enter the long dialling sequence numbers as you normally would, but
keep in mind that each key counts as one location, so the number of
locations you can call becomes limited.
■ If the line is busy or a connection could not be made for some other
reasons while broadcasting, the machine will redial the number
automatically.
■ If the memory is full, press Stop to abort the job or press Start to
send the portion that is in the memory (if more than one page has
been scanned).
■ When Broadcasting using a Group, Real Time TX needs to be set to
OFF.
Multiple Resolution Transmission
Use this feature to select separate resolution settings for each page of the
fax you’re sending. This could be useful if you’re sending a fax with
photos and letters, or some pages with small print and others with normal
print. Resolution settings return to STANDARD after the fax is sent.
1 Insert documents in feeder, then
for the FAX-8350P, Press
Menu , 3 , 4 .
for the MFC-9650/FAX-8750P, Press Menu , 1 , 3 , 4 .
2 Use or to select resolution for page 1, then press Set .
3 Repeat Step 2 for subsequent pages. Press Stop when you’re
finished. The screen displays
ACCEPTED
NEXT
1.YES 2.NO
4 Press 1 if you want to select additional settings. The display returns
to the SETUP SEND menu. ––OR–– Press 2 if you have finished
choosing settings.
5 Enter the fax number you’re calling, and press Start .