Brother FAX-8350P - Manual (Page 37)

27
O N - S C R E E N P R O G R A M M I N G
2. SETUP RECEIVE (continued)
Function Description Factory Set Chapter
4. REMOTE CODE Turn ON this function and OFF 5
enter a code to activate or ( 51, #51)
deactivate your machine from
a remote location.
5. REDUCTION Reduces size of image. AUTO 5
6. MEM. RECEIVE Automatically stores any ON 5
incoming faxes in its memory
if it runs out of paper.
7. PRINT DENSITY Adjusts printing to be lighter or -- 5
darker.
8. POLLING RX You call another fax machine to -- 5
receive a fax from it.
9. TONER SAVE Increase life of toner cartridge. OFF 5
0. PC INTERFACE Allows fax reception into your ON 5
(Only for MFC-9650/ PC.
FAX-8750P)
3. SETUP SEND
Function Description Factory Set Chapter
1. COVERPG SETUP Automatically sends a OFF 6
programmable cover page or
prints a sample coverpage.
2. COVERPAGE NOTE Program a customized message -- 6
for fax cover page.
3. CONTRAST Change the lightness or AUTO 6
darkness of a fax you are
sending.
4. RESOLUTION Allows you to change STANDARD 6
resolutions page by page.
5. OVERSEAS MODE Special setting for international OFF 6
transmissions.
6. CALL RESERVE You can send a fax, then speak OFF 6
(with external telephone to the person operating the
only)
other fax machine or print a
sample call back message.
7. TIMER Set the machine to send your -- 6
documents later.
8. POLLED TX Set Polled Transmission for -- 6
someone to poll your fax
machine to receive a fax from
you.