Brother FAX-8350P - Manual (Page 41)

4
C H A P T E R F O U R
Initial
Setup
31
Getting Started
Setting the Dialling Mode (Tone/Pulse)
Your machine is initially set to TONE. If you are using a PULSE dial
line, you can change the setting to PULSE by following the steps below.
1 For the FAX-8350P, Press Menu , 1 , 1 .
For the MFC-9650/FAX-8750P, Press Menu , 1 , 1 , 1 .
The screen prompts you to select TONE or PULSE.
DIALLING:TONE
SELECT { } & SET
DIALLING:PULSE
SELECT { } & SET
2 Use or to select the dialling mode.
3 Press Set when the screen displays the dialling mode you want.
4 Press Stop to exit.
Setting the Date and Time
Your machine displays the date and time, and prints it on every fax you
send.
In the event of a power failure, the machine maintains date and time
information for about 9 hours. All other settings remain unaffected.