Nokia N86 8MP - Manual (Page 55)

with that device, pairing is removed immediately, and
the connection is ended.
To allow a paired device to connect automatically to
your device, select Set as authorized . Connections
between your device and the other device can be made
without your knowledge. No separate acceptance or
authorization is needed. Use this status only for your
own devices, such as your compatible headset or
computer, or devices that belong to someone you trust.
If you want to accept connection requests from the
other device separately every time, select Set as
unauthorized .
To use a Bluetooth audio accessory, such as a Bluetooth
handsfree or headset, you need to pair your device
with the accessory. For the passcode and further
instructions, see the accessory user guide. To connect
to the audio accessory, switch on the accessory. Some
audio accessories connect automatically to your
device. Otherwise, open the paired devices tab, and
select the accessory and Options > Connect to audio
device .
Block devices
Select Menu > Tools > Connectivity > Bluetooth .
1. To block a device from establishing a Bluetooth
connection to your device, open the paired devices
tab.
2. Select a device you want to block and Options >
Block .
To allow the pairing of a device again after it was
blocked, delete it from the blocked devices list.
Open the blocked devices tab, and select
Options >
Delete .
If you reject a pairing request from another device, you
are asked if you want to block all future connection
requests from this device. If you accept the query, the
remote device is added to the list of blocked devices.
Security tips
When you are not using Bluetooth connectivity, select
Bluetooth > Off or My phone's visibility >
Hidden .
Do not pair with an unknown device.
Data cable
To avoid corrupting data, do not disconnect the USB
data cable during data transfer.
Transfer data between your device and a PC
1. Insert a memory card in your device, and connect
the device to a compatible PC with the data cable.
2. When the device asks which mode to use, select
Mass storage . In this mode, you can see your device
as a removable hard drive in your computer.
55
Co
nnect
ivi
ty