Call forward, Call restrictions, Se ttings – Nokia N86 8MP User Manual
Page 143
●
Show call duration
— Activate this setting if you
want the length of a call to be displayed during the
call.
●
Summary after call
— Activate this setting if you
want the length of a call to be displayed after the
call.
●
1-touch
— Select
On
, and the numbers assigned to
the number keys (2 to 9) can be dialed by pressing
and holding the key.
●
Anykey answer
— Select
On
, and you can answer
an incoming call by briefly pressing any keypad key,
except the power key, selection keys, zoom/volume
key, or capture key.
●
Line in use
— This setting (network service) is
shown only if the SIM card supports two subscriber
numbers, that is, two phone lines. Select which
phone line you want to use for making calls and
sending text messages. Calls on both lines can be
answered irrespective of the selected line. If you
select
Line 2
and have not subscribed to this
network service, you are not able to make calls.
When line 2 is selected, is shown in the standby
mode.
●
Line change
— To prevent line selection (network
service), select
Disable
if supported by your SIM
card. To change this setting, you need the PIN2 code.
Call forward
Select
Menu
>
Tools
>
Settings
and
Phone
>
Call
forwarding
.
Call divert allows you to divert incoming calls to your
voice mailbox or another phone number. For details,
contact your service provider.
To activate call forwarding, select
Activate
. To check
whether the option is active, select
Check status
.
Several diverting options can be active at the same
time. When all calls are diverted,
is shown in the
standby mode.
Call restrictions
Select
Menu
>
Tools
>
Settings
and
Phone
>
Call
restriction
.
Call restrictions (network service) allow you to restrict
the calls that you make or receive with the device. For
example, you can restrict all outgoing international
calls or incoming calls when you are abroad. To change
the settings, you need the restricting password from
your service provider.
Voice call restrictions
Select the desired restricting option, and set it on
(
Activate
) or off (
Deactivate
), or check whether the
option is active (
Check status
). Call restricting affects
all calls, including data calls.
143
Se
ttings