Nokia N86 8MP - Manual (Page 147)

● Network type — Select the internet protocol type
to transfer data to and from your device. The other
settings depend on the selected network type.
● Phone IP address (for IPv4 only) — Enter the IP
address of your device.
● DNS addresses — Enter the IP addresses of the
primary and secondary DNS servers, if required by
your service provider. To obtain these addresses,
contact your internet service provider.
● Proxy server address — Enter the address of the
proxy server.
● Proxy port number — Enter the port number of
the proxy server.
WLAN internet access points
Select Menu > Tools > Settings and Connection >
Destinations > Access point , and follow the
instructions on the display. Or, open one of the access
point groups, select an access point marked with ,
and select Edit .
Use the instructions provided by your service provider
to edit the following:
● WLAN network name — Select Enter manually or
Search for networks . If you select an existing
network, WLAN network mode and WLAN
security mode are determined by the settings of its
access point device.
● Network status — Define whether the network
name is displayed.
● WLAN network mode — Select Ad-hoc to create
an ad hoc network, and to allow devices to send and
receive data directly; a WLAN access point device is
not needed. In an ad hoc network, all devices must
use the same WLAN network name.
● WLAN security mode — Select the encryption
used: WEP , 802.1x (not for ad hoc networks), or
WPA/WPA2 . If you select Open network , no
encryption is used. The WEP, 802.1x, and WPA
functions can be used only if the network supports
them.
● Use access point — Select After confirmation to
set the device to ask for confirmation before the
connection using this access point is created or
Automatically to set the device to connect to the
destination using this access point automatically.
To enter the settings for the selected security mode,
select WLAN security settings .
Advanced WLAN settings
Select Options > Advanced settings and from the
following:
● IPv4 settings — Enter the IP address of your device,
the subnet IP address, the default gateway, and the
IP addresses of the primary and secondary DNS
servers. Contact your internet service provider for
these addresses.
● IPv6 settings — Define the type of DNS address.
147
Se
ttings