beautypg.com

Still image camera settings, Color and lighting settings, Ca mera – Nokia N86 8MP User Manual

Page 40

background image

settings," p. 40.

To change the main settings, in the

image or video mode, select

Options

>

Settings

.

Still image camera settings

To change the main settings, in the image mode, select

Options

>

Settings

and from the following:

Image quality

— Set the resolution (main camera

only). The better the image quality, the more

memory the image consumes.

Add to album

— Save the image to an album in

Photos.

Record location

— To add GPS location coordinates

to each image file, select

On

. Receiving a GPS signal

may take time or the signal may not be available.

Show captured image

— Select whether to view

the captured image after it is taken or to continue

image capturing immediately.

Default image name

— Define the default name

for the captured images.

Extended digital zoom

— The setting is only

available in the main camera.

On (continuous)

allows the zoom increments to be smooth and

continuous between digital and extended digital

zoom,

On (paused)

allows the zoom increments to

pause at the digital and extended digital step point,

and

Off

allows a limited amount of zoom while

retaining the image resolution. Use the extended

zoom only when getting closer to the subject is

more important than the final image quality. The

overall quality of a digitally zoomed image is always

lower than that of an unzoomed image.

Capture tone

— Set the tone that sounds when you

capture an image.

Memory in use

— Select where to store your

images.

Restore camera settings

— Restore the camera

settings to default values.

Color and lighting settings

In the active toolbar, select from the following:

Flash mode

( ) (image only) — Select the desired

flash mode.

Color tone

( ) — Select a color effect.

Switch video light on

or

Switch video light off

— Switch the video light on or off (video mode

only).

White balance

( ) — Select the current lighting

condition. This allows the camera to reproduce

colors more accurately.

Exposure compensation

( ) (image only) — If you

are shooting a dark subject against a very light

background, such as snow, adjust the exposure to

+1 or +2 to compensate for the background

brightness. For light subjects against a dark

background, use -1 or -2.

Sharpness

( ) (image only) — Adjust the

sharpness of the image.

40

Ca

mera