Nokia 7610 - Manual (Page 84)

Nokia 7610 User Guide 71 Copyright © 2004 Nokia
Tools and applications
Replay, erase, or change a voice command
To replay, erase, or change a voice command, scroll to the item that has a voice
command (indicated by
), and select Options and one of the following:
Playback—Listen to the voice command again.
Delete—Erase the voice command.
Change—Record a new voice command. Press Start to record.
• DEVICE MANAGER
This feature is operator dependent and may not be available on all
phones. Contact your service provider for information and availability.
Select Menu > Tools > Dev. mgr.
Options in Device manager are Connect , New profile , Edit profile , Delete profile ,
Enable or Disable configurations , View log , Help , and Exit .
When you need help with difficult phone configurations, Device manager allows a
third party, such as your service provider, to assist you directly with phone settings. To
allow device management, your phone must establish a connection and synchronize
with the third party’s server. You can start the synchronization session from your
phone, and you can accept or reject server-initiated synchronization attempts.
A device manager profile must be defined before you can connect to a server. The
third party who is assisting you can help define the profile settings:
Server name—Display name of the server.
Server ID—Remote device manager server ID.
Server password—Password used in server alerts. Enter the password that must be
provided by the device manager server when synchronizing with your phone.
Access point—Internet access point your phone uses to establish the server
connection. Choose from the list of access points defined in your phone. See
"Access points" on page 59.
Host address—Device management server URL.
Port—Device management server port.
User name—Your user name for this profile.
Password—Your password for this profile.
Allow configuration—Device management allowed on this server. Select Yes or No.
Auto-accept all reqs.—Automatic or approved device management on this server.
Select Yes to allow synchronization without your verification, or select No to verify
each synchronization attempt.