Nokia 7610 - Manual (Page 38)

Nokia 7610 User Guide 25 Copyright © 2004 Nokia
Personal information
If you want to copy a phone, fax, or pager number from Contacts to your SIM card,
select Contacts, open a contact card, scroll to the number, and select Options >
Copy to SIM direct.
Add a ringing tone for a contact card or group
You can set a ringing tone for each contact card and group. When that contact or
group member calls you, the phone plays the chosen ringing tone (if the caller’s
telephone number is sent with the call and your phone recognizes it).
1 Press the Scroll key to open a contact card; or scroll right to go to groups, and
select a contact group.
2 Select Options > Ringing tone.
A list of ringing tones opens.
3 Scroll to the ringing tone you wish to use for the contact or group, and
press Select.
4 To remove the ringing tone, select Default tone from the list of ringing tones.
For an individual contact, the phone will always use the ringing tone that was
assigned last. If you change a group ringing tone, then the ringing tone of a single
contact that belongs to that group, the ringing tone of the single contact is used.
Voice dialing
You can make a phone call by saying a voice tag that has been added to a contact
card. Any spoken words can be a voice tag.
When recording, hold the phone at a short distance away from your mouth. After
the starting tone, say clearly the word, or words, you want to record as a voice tag.
REQUIREMENTS FOR VOICE TAGS
Before using voice dialing, note the following:
• Voice tags are not language-dependent. They are dependent on the
speaker's voice.
•
You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags, and use them
in a quiet environment.
• Very short names are not accepted. Use long names, and avoid similar names
for different numbers.
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialing
in all circumstances.