Nokia 7610 - Manual (Page 73)

60 Copyright © 2004 Nokia
Fill in these settings from the top because your Data bearer selection determines
which fields are available:
• Connection name—Give a descriptive name for the data connection.
• Data bearer—The options are GPRS and Data call. The data bearer selection
affects the other fields that are available. Fill in all fields marked with Must
be defined, or with an asterisk. Other fields can be left empty, unless you have
been instructed otherwise by your service provider.
To use a data connection, your network operator or service provider must
support this feature, and if necessary, activate it for your SIM card.
• Access point name (for packet data only)—The access point name is needed
to establish a connection to the GPRS network. You obtain the access point
name from your network operator or service provider.
• Dial-up number (for Data call only)—Enter the the modem telephone number
of the access point.
•
User name—Enter a user name if the service provider requires it. The user
name may be needed to make a data connection and is usually provided by the
service provider. The user name is often case-sensitive.
• Prompt password—If you must key in a new password every time you log on to
a server or if you do not want to save your password to the phone, choose Yes.
• Password—A password may be needed to make a data connection and is
usually provided by the service provider. The password is often case-sensitive.
When you are writing the password, the characters you enter are shown briefly
and then changed to asterisks (*). The easiest way to enter numbers is to press
and hold the number you want to enter, and then continue entering letters.
• Authentication—Normal or Secure.
• Homepage—This setting depends on what you are setting up. Write either the
service address or the address of the multimedia messaging center.
• Data call type (for data call only)—Analog, ISDN v.110, or ISDN v.120 defines
whether the phone uses an analog or digital connection. This setting depends
on both your GSM network operator and your Internet service provider (ISP)
because some GSM networks do not support certain types of ISDN connections.
For details, contact your ISP. If ISDN connections are available, they connect
more quickly than analog methods.
• Maximum data speed (for data call only)—The options are Automatic, 9600,
or 14400, depending on what you have chosen in Data call type. This option
allows you to limit the maximum connection speed when GSM data is used.
Higher data rates may cost more, depending on the service provider.
These speeds represent the maximum speed at which your connection will
operate. During the connection, the operating speed may be less, depending
on network conditions.