Assign 1-touch dialing keys – Nokia 7610 User Manual

Page 39

ADD A VOICE TAG TO A PHONE NUMBER

Voice tags can only be added to phone numbers stored in phone memory. See "Copy
between SIM card and phone memory" on page 24.

In Contacts, scroll to the contact to which you want to add a voice tag, and
press the Scroll key to open the contact card.

Scroll to the number to which you want to add the voice tag, and select
Options > Add voice tag.

Press Start to record a voice tag.

After the starting tone, clearly say the words you want to use as a voice tag.

After recording, the phone plays the recorded tag, and Playing voice tag
is displayed.

When the voice tag has been successfully saved, Voice tag saved is displayed and
a beep sounds. A symbol

can be seen next to the number in the contact card.

To replay, erase, or change a voice tag, scroll to the item that has a voice tag
(indicated by

), and select Options > Voice tag > Playback, Change, or Delete.

MAKE A CALL USING A VOICE TAG

In the standby mode, press and hold the Right selection key.

A short tone is played, and Speak now is displayed.

When you make a call by using a voice tag, hold the phone at a short distance
from your mouth, and say the voice tag clearly.

The phone plays the original voice tag, displays the name and number, and
dials the number of the recognized voice tag.

If the phone plays the wrong voice tag or if you want to retry voice dialing, press Retry.

Voice dialing should not be used when a data call or a GPRS connection is active
because the voice call will interrupt the connection.

Assign 1-touch dialing keys

1-touch dialing is a quick way to call frequently used numbers. You can assign
1-touch dialing keys to eight phone numbers. Number 1 is reserved for voice mail.

Open the contact card for which you want a 1-touch dialing key, and scroll to
the phone number you want to add to 1-touch dialing.

Select Options > Assign 1-touch no..

The 1-touch dialing grid opens, showing you the numbers from 2–9.

Scroll to a number and press Assign. When you return to the contact
information view, the 1-touch dialing icon is displayed next to the number.

To call the contact by 1-touch dialing in the standby mode, press the 1-touch
dialing key and Send key, or press and hold the 1-touch dialing key.