Nokia 7610 - Manual (Page 75)

62 Copyright © 2004 Nokia
For information on pricing, contact your service provider.
To define GPRS connection settings, select Menu > Settings > Connection >
GPRS, and specify these settings:
GPRS connection—If you select When available and your network supports packet
data, the phone registers to the GPRS network. Also, starting an active packet data
connection, for example, to send and receive e-mail, is quicker. If you select When
needed, the phone will use a packet data connection only if you start an application
or action that needs it. The GPRS connection can be closed after the applications
no longer use it.
If there is no GPRS coverage and you have chosen When available, the phone
periodically tries to establish a packet data connection.
Access point—The access point name is needed when you use your phone as a
packet data modem to your computer.
Data call
Online time—This setting affects all access points using a GSM data call. If there
are no actions, the data call is dropped automatically after a time-out period.
Select User defined (in which case you enter a time) or Unlimited.
Configurations
When you open a message that contains configuration settings for your phone, the
message is displayed in this viewer. If you do not have any configuration settings
messages, this screen will be empty. To delete a message from this screen, press the
Clear key.
Options in the configurations viewer are Save , Message details , and Move to folder .
• DATE AND TIME
Select Menu > Settings > Date and time.
The Date and time settings allow you to define the date and time
used in your phone, as well as change the date and time format and separators.
You can also change the following settings:
Clock type—Select Analog or Digital to change how the clock is displayed in the
standby mode. See "Clock" on page 78.
Clock alarm tone—Changes the tone played when the clock reaches an alarm time.
Auto time update—Allows the network to update time, date, and time zone
information to your phone (network service). For the auto time update setting to
take effect, the phone needs to be restarted. Check any alarms because they may
be affected by the auto time update.
GMT offset—Changes the time zone for the clock time.
Daylight-saving—Sets daylight saving time on or off.