beautypg.com

Join a channel, Push to talk log, Exit push to talk – Nokia E61i User Manual

Page 71: Net calls, Define the net call settings

background image

Join a channel

To join a channel, select

Options

>

PTT channels

. Select the channel you want to talk to, and press the voice key. Remember to

hold the device in front of you during a push to talk call so you can see the display. The display informs you when it is your turn

to speak. Speak towards the microphone, and do not cover the loudspeaker with your hands. Press and hold the voice key the

entire time you are talking. When you have finished talking, release the key.
To switch between channels during multiple calls, select

Swap

. The active channel is highlighted.

To view the currently active participants in the channel, select

Options

>

Active members

.

To invite a participant to a channel, select

Options

>

Send invitation

.

Push to talk log

To open the push to talk log, select

Options

>

PTT log

. The log shows the date, time, duration, and other details of your push

to talk calls.

Tip: To initiate a one-to-one call from

PTT log

, select the desired log event and press the voice key.

Exit push to talk

Select

Options

>

Exit

. Select

Yes

to log out and close the service. Press

No

if you want to keep the application active on the

background.

Net calls

With the net call service (network service), you can make and receive calls over the internet.
Your device supports voice calls over the internet (net calls). Your device attempts emergency calls primarily over cellular

networks. If an emergency call using cellular networks is not successful, your device attempts an emergency call through your

net call provider. Due to the established nature of cellular telephony, you should use cellular networks for emergency calls, if

possible. If you have cellular network coverage available, make sure that your cellular phone is switched on and ready to make

calls before you attempt an emergency call. The capability for an emergency call using internet telephony depends on the

availability of a WLAN network and your net call provider's implementation of emergency call capabilities. Contact your net call

provider to check the internet telephony emergency call capability.
VoIP (voice over internet protocol) technology is a set of protocols that facilitate phone calls over an IP network, such as the

internet. VoIP phone calls can be established between computers, between mobile phones, and between a VoIP device and a

traditional telephone. To make or receive a VoIP call, your device must be within WLAN coverage, for example.
The availability of the net call service may vary according to your country or sales area.

Define the net call settings

Before you can make net calls, you need to define the net call settings. After you have defined the net call settings with these

instructions, your device logs in to the net call service automatically when you select

Menu

>

Connect.

>

Internet tel.

.

First: define a SIP profile
1. Select

Menu

>

Tools

>

Settings

>

Connection

>

SIP settings

>

Options

>

Add new

, and enter the required information.

See "Edit SIP profiles," p. 82.

You must define all available SIP settings, but ensure that

Registration

is set to

Always on

.

Contact your net call provider for the correct information.

2. Select

Proxy server

, and set

Transport type

to

Auto

.

3. Select

Back

until you return to the

Connection

menu.

Second: define a net call profile
1. Select

Internet tel. settings

>

Options

>

New profile

. Enter a name for the profile, and select the SIP profile you just created.

2. Select

Back

until you return to the main menu.

Third: select a preferred net call profile (optional)
If you select a preferred net call profile,

Internet tel.

automatically uses this network profile to connect to the net call service.

1. Select

Menu

>

Connect.

>

Internet tel.

.

2. Select

Preferred profile

and the net call profile you just created.

3. Select

Back

until you return to the main menu.

Tip: You can also use manual login to the net call service. Use the same settings instructions as with automatic login,

but ensure that

Registration

is set to

When needed

and

Transport type

is set to

UDP

or

TCP

. With manual login, you

need to manually select the network used in the net call service.

T e l e p h o n e

© 2007 Nokia. All rights reserved.

39