Nokia E61i - Manual (Page 109)

17. GPS applications
The Global Positioning System (GPS) is operated by the government of the United States, which is solely responsible for its
accuracy and maintenance. The accuracy of location data can be affected by adjustments to GPS satellites made by the United
States government and is subject to change with the United States Department of Defense civil GPS policy and the Federal
Radionavigation Plan. Accuracy can also be affected by poor satellite geometry. Availability and quality of GPS signals may be
affected by your location, buildings, natural obstacles, and weather conditions. The GPS receiver should only be used outdoors
to allow reception of GPS signals.
GPS should only be used as a navigation aid. It should not be used for precise location measurement and you should never rely
solely on location data from the GPS receiver for positioning or navigation.
The trip meter has limited accuracy, and rounding errors may occur. Accuracy can also be affected by availability and quality of
GPS signals.
The GPS applications in your device require an additional Bluetooth GPS enhancement to operate.
Positioning
With the positioning service you can receive information from service providers about local issues such as weather or traffic
conditions, based on the location of your device (network service).
Select
Menu > Tools > Position. .
To select a positioning method, scroll to the positioning method, and select Options > Enable . To stop using it, select Options >
Disable . The Bluetooth GPS positioning method enables you to use Bluetooth GPS enhancements for positioning. The Network
based positioning method is provided by your network operator or service provider. Both positioning methods can be used
simultaneously.
Navigator
Select Menu > Tools > Navigator .
Navigator is a GPS application that enables you to view your current location, find your way to a desired location, and track
distance. The coordinates to locations are expressed in degrees and decimal degrees using the WGS-84 coordinate system.
The application requires a Bluetooth GPS accessory to operate. You must also have Bluetooth GPS positioning method enabled
in Menu > Tools > Position. .
The application must receive positioning info from at least three satellites to use it as a traveling aid.
The application requires a Bluetooth GPS accessory to operate.
Select from the following:
•
Navigation — View navigating information to your trip destination.
• Position — View positioning information about your current location.
• Trip distance — View your traveling information such as the distance and duration you have traveled and your average and
maximum speeds.
Navigation view
The navigation view guides you to your trip destination. The cardinal points are indicated by letters on the circle, and the general
direction to your destination by a deeper color.
Select
Options , and from the following:
• Set destination — Select a landmark or location as the destination of your trip, or enter the destination latitude and longitude
coordinates.
• Stop navigation — Delete the destination set for your trip.
• Save position — Save your current position as a location or landmark.
• Satellite status — View the signal strength of the satellites that provide the positioning info necessary for navigation.
• Saved locations — View the locations you have temporarily saved in your device to help in navigation.
Position view
View positioning info such as the latitude and longitude coordinates and altitude of your current location. You can also see the
accuracy of this info.
Select
Options , and from the following:
• Save position — Save your current position as a location or landmark.
• Satellite status — View the signal strength of the satellites that provide the positioning info necessary for navigation.
• Saved locations — View the locations you have temporarily saved in your device to help in navigation.
© 2007 Nokia. All rights reserved. 77