Camera, Lock the keys, Connectors – Nokia E61i User Manual

Page 44

Function key
To enter a character or function marked with color, press the function key, so that is shown on the display, then the key you

want.
To enter only characters marked with color, press the function key twice so that is shown on the display, then the characters

you want.
To activate Bluetooth, press the function key and Ctrl key simultaneously. To deactivate Bluetooth, press the function key and

Ctrl key again.
To activate infrared, press the function key and Chr key simultaneously.
Menu key
Leaving applications running in the background increases the demand on battery power and reduces the battery life. To access

the applications in your device, press the menu key in the standby modes. To return to

from an application, leaving the

application open in the background, press the menu key. Press and hold the menu key to see a list of the active applications

and switch between them. In this user guide, "select

" refers to pressing this key.

Contacts key
To access the

Contacts

directory from any application, press the contacts key.

Voice key
Press the voice key to open

Recorder

. Press and hold the voice key to use voice commands.

See "Voice commands," p. 41.

Camera

You can take photos or record video clips with the built-in camera. The camera lens is on the back of the device, and the display

works as a viewfinder.
To take a picture, select

Media

Camera

. Use the display as a viewfinder, aim at your subject,

and press the scroll key. The device saves the photo in the default folder, or in the folder you have

defined.

Lock the keys

When the keyguard is on, calls may be possible to the official emergency number programmed into your device.
Lock the keys to prevent accidental keypresses.
To lock the keys in the standby mode, press the left selection key (1) and the function key (2). To

unlock, press the left selection key and the function key again.

Tip: To lock the keys in the

or in an open application, press the power key briefly,

and select

Lock keypad

. To unlock, press the left selection key and the function key.

When the device is locked, calls may be possible to the official emergency number programmed

into your device. You can also lock the device in the standby mode using your lock code. Press the

power key, select

Lock phone

, and enter your lock code. The default lock code is 12345. To unlock,

press the left selection key, enter your lock code, and press the scroll key.

Connectors

Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset

where it can endanger your safety.

Pop-Port™ connector for headset and other

enhancements

G e t s t a r t e d