Generating ascii characters, Temporarily using overlay (overlay off), Temporarily changing modes – Toshiba Satellite 2430-301 User Manual
Page 97
The Keyboard
Satellite 2430 Series
5-8
Satellite 2430 Series
Version
1
Last Saved on 04/04/2003 13:35
ENGLISH using Euro_M.dot –– Printed on 04/04/2003 as IM_243EN
Temporarily using overlay (overlay off)
While using the normal keyboard, you can temporarily use the keypad
overlay without turning it on:
1.
Press and hold down Fn.
2.
Check the keyboard indicators. Pressing Fn turns on the most
recently used overlay. If the Numeric mode icon lights, you can use
the overlay for numeric entry. If the Arrow mode icon lights, you can
use it for cursor and page control.
3.
Release Fn to return to normal keyboard operation.
Temporarily changing modes
If the computer is in Numeric mode, you can switch temporarily to
Arrow mode
by pressing a shift key.
If the computer is in Arrow mode, you can switch temporarily to
Numeric mode
by pressing a shift key.
Generating ASCII characters
Not all ASCII characters can be generated using normal keyboard
operation. But, you can generate these characters using their ASCII
codes.
With the overlay on:
1.
Hold down Alt.
2.
Using the overlay keys, type the ASCII code.
3.
Release Alt, and the ASCII character appears on the display screen.
With the overlay off:
1.
Hold Alt + Fn.
2.
Using the overlay keys, type the ASCII code.
3.
Release Alt + Fn, and the ASCII character appears on the display
screen.
A list of ASCII characters with their codes is shown in Appendix G.