Toshiba Satellite 2430-301 - Manual (Page 182)

AT Commands
Satellite 2430 Series H-10
Satellite 2430 Series Version
1
Last Saved on 04/04/2003 13:35
ENGLISH using Euro_M.dot –– Printed on 04/04/2003 as IM_243EN
&Tn Self-test commands
These tests can help to isolate problems if you experience
periodic data loss or random errors.
&T0
Abort. Stops any test in progress.
&T1 Local analogue loop. This test verifies modem
operation, as well as the connection between the
modem and computer. Any data entered at the local
DTE is modulated, then demodulated, and returned to
the local DTE. To work properly, the modem must be
off-line.
Result Codes:
OK n=0
CONNECT n=1
ERROR Otherwise
&V View active configuration and stored profile
This command is used to display the active profiles on your
computer’s monitor.
&V
View active file
For example:
Option Selection AT Command
Comm Standard Bell B
Command Char Echo Enable E
Speaker Volume Medium L
Speaker Control OnUntilCarr M
Result Codes Enable Q
Dialler Type Tone T/P
Result Code Form Text V
Extend Result Code Enable X
Dial Tone Detect Enable X
Busy Tone Detect Enable X
LSD Action Standard RS-232C &C
DTR Action Ignore &D
Press any key to continue; Esc to
quit.
V.22b Guard Tone Disable &G