Tv output signal, Standby/hibernation – Toshiba Satellite 2430-301 User Manual
Page 141
Troubleshooting
Satellite 2430 Series
8-17
Satellite 2430 Series
Version
1
Last Saved on 04/04/2003 13:35
ENGLISH using Euro_M.dot –– Printed on 04/04/2003 as IM_243EN
TV output signal
Problem Procedure
Display on TV is poor
Make sure the TV type is correct for your area:
NTSC (US) or PAL (Europe).
No display
Try adjusting the contrast and brightness
controls on the external monitor.
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 5, The Keyboard.
If problems persist, contact your dealer.
If you turn the computer off in Standby mode while the display is on TV,
the computer will select either the internal LCD or an external computer
CRT as the display device.
Standby/Hibernation
Problem Procedure
The system will not
enter Standby/
Hibernation
Is Windows Media™ Player open? The system
might not enter Standby/Hibernation, if Windows
Media Player is either playing a selection or
finished playing a selection. Close Windows
Media Player before you select
Standby/Hibernation.
If problems persist, contact your dealer.