beautypg.com

Qn local flow control selection, Vn protocol result code, B view numbers in blacklist – Toshiba Satellite 2430-301 User Manual

Page 185: Cn data compression control

background image

AT Commands

Satellite 2430 Series

H-13

Satellite 2430 Series

Version

1

Last Saved on 04/04/2003 13:35

ENGLISH using Euro_M.dot –– Printed on 04/04/2003 as IM_243EN

\Qn Local flow control selection

\Q0

Disable flow control.

\Q1

XON/XOFF software flow control.

\Q3

CTS/RTS to DTE (default).

Result Codes:
OK

n=0,1,3

ERROR Otherwise

\Vn Protocol result code

\V0

Disable protocol result code appended to DCE speed.

\V1

Enable protocol result code appended to DCE speed
(default).

Result Codes:
OK n=0,1
ERROR Otherwise

%B View numbers in blacklist

This command displays the phone numbers for which
connections have failed. If you are using the modem in a country
that does not require blacklisting, an error code results when you
execute this command.

Refer to table H-1 for country-specific codes.

%Cn Data compression control

This command determines the operation of V.42bis and MNP
class 5 data compression. On-line changes do not take effect
until a disconnect occurs first.
%C0

V.42bis/MNP 5 disabled. No data compression.

%C1

V.42bis/MNP 5 enabled. Data compression enabled
(default).

Result Codes:
OK

n=0,1

ERROR Otherwise

This manual is related to the following products: