Toshiba Satellite 2430-301 - Manual (Page 203)

Internal Modem Guide
Satellite 2430 Series L-2
Satellite 2430 Series Version
1
Last Saved on 04/04/2003 13:35
ENGLISH using Euro_M.dot –– Printed on 04/04/2003 as IM_243EN
Installing the modem board
To install the modem board and jack, follow the steps below.
1.
Turn the computer upside down.
2. Remove two screws securing the modem socket cover.
3. Lift off the modem socket cover.
4. Connect the modem cable to the modem board.
5. Remove two screws from the modem board socket.
6. Align the connectors and seat the modem board.
7. Secure the modem board with the two screws removed in step 5.
8. Seat the modem socket cover and secure it with two screws.
Installing the battery pack
Refer to Chapter 6 for details on installing the battery pack.
Removing the internal modem
To remove the internal modem.
1.
Turn the computer upside down.
2. Remove the battery.
3. Remove two screws securing the modem socket cover.
4. Lift off the modem socket cover.
5. Remove two screws securing the modem board. Store the screws in a
safe place. Be careful not to lose them.
6. Disconnect the modem board and lift it out.
7. Disconnect the modem cable.
8. Seat the modem socket cover and secure it with two screws.