Toshiba Satellite 2430-301 - Manual (Page 174)

AT Commands
Satellite 2430 Series H-2
Satellite 2430 Series Version
1
Last Saved on 04/04/2003 13:35
ENGLISH using Euro_M.dot –– Printed on 04/04/2003 as IM_243EN
A/ Repeat last command
This command repeats the last command string entered. Do not
precede this command with an AT prefix or conclude it by
pressing Enter.
A Answer command
This command instructs the modem to go off-hook and answer
an incoming call.
Refer to the section Country select command and S-register in Appendix I
for country-specific codes.
Bn Communication standard setting
This command determines the communication standard CCITT
or Bell.
B0
Selects CCITT V.22 mode when the modem is at
1200 bps.
B1 Selects Bell 212A when the modem is at 1200 bps
(default).
B15 Selects V.21 when the modem is at 300 bps.
B16 Selects Bell 103J when the modem is at 300 bps
(default).
Result Codes:
OK
n=0,1,15,16
ERROR Otherwise