Installing the battery pack – Toshiba Satellite 2430-301 User Manual
Page 109
Power and Power-Up Modes
Satellite 2430 Series
6-12
Satellite 2430 Series
Version
1
Last Saved on 04/04/2003 13:35
ENGLISH using Euro_M.dot –– Printed on 04/04/2003 as IM_243EN
Installing the battery pack
To install a battery pack, follow the steps below.
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.
1.
Turn the computer’s power off.
2.
Disconnect all cables connected to the computer.
3.
Hold the battery pack so that the label faces down and the
connectors on the battery face the connectors on the computer.
4.
Gently press the battery into the battery bay until the latch clicks into
place.
Installing the battery pack