beautypg.com

Installing the product on a tv table etc, Preparing the cables, English – Pioneer KRP-SW01 User Manual

Page 15: Precautions when moving, Installation precautions, Using the cable binder

background image

15

En

English

Installing the Product on a TV table etc.

Be sure to observe the following precautions when moving
or installing this product with a Pioneer display and television
into a TV table or other enclosure.

Precautions when moving

Caution

• When moving the product more than a few

meters, first remove the speaker, then remove
the Pioneer display and television from the stand
and move the speaker,

stand, Pioneer display and

television separately.

• When detaching the Pioneer display and television

from the stand, be sure to follow the procedure
described in “Detaching the Pioneer Display and
Television from the Stand” on page 17.

Precautions when installing in a TV
table or other enclosure

When installing in

a TV table or other
enclosure, hold the

Pioneer display and television

by the handles located on the
rear of the Pioneer display
and television. If you hold
the speakers, they may be
damaged or twisted.

Installation precautions

Make sure that you always secure a space at least as large
as that shown in the following diagram in front of and behind
the table top stand.

Depth of the TV table

480 mm (18-29/32 inch)

or more recommended

Min. 30 mm
(1-3/16 inch)

Min. 30 mm
(1-3/16 inch)

TV table

Back

Front

Table top stand

Pioneer display and television

Min

. 30 mm

(1-3/16 inch)

Min

. 40 mm

(

1-9/16 inch

)

Caution

• If the stand

protrudes from the
TV table, it could
cause unforeseen
accidents such as

the equipment breaking or

falling over.

• When rotating, take care not to allow the

display to bump into walls or surrounding
objects.

Range of angle rotation

10°

10°

Hold the Pioneer display and
television by its handles and
from the top.

Preparing the Cables

Use the enclosed cable binder to bind the cables.

œÌi

Be very careful not to apply force to the bases of the cables on
the Pioneer display and television side.

Using the cable binder

1

Insert the cable binder through the hole on the

top of the rotating platform of the stand.

Cable binder

2

Gathering the cables and routing them through

the cable binder.

Protrusion is
dangerous.

Caution

This manual is related to the following products: