Pioneer KRP-SW01 - Manual (Page 11)

11
En
English
Checking the Enclosed Parts
Check to make sure that you have all the enclosed parts before assembly and installation.
• Table top stand ×1
• Screws �
(M4 × 10 mm: black) ×2
• Hexagonal wrench x 1
(Diagonal size: 4 mm)
• Operating instructions
(this document) x 1
• Support columns × 2 • Cable binder x 1 • Fall-prevention straps × 2
• Screws �
(M6 × 12 mm: black) ×4
[used to anchor the support columns and
the table top stand]
• Screws �
(M8 × 15 mm: black) ×2
• Screws �
(M8 × 23 mm: black) ×2
Caution
Keep unused small parts out of reach of children to prevent
ingestion by mistake.
Care for the Glossy Surface of the Stand
Gently wipe the glossy surface of the stand with the wiping
cloth provided with the Pioneer display and television.
Glossy surface
œÌi
• Using a dusty or hard cloth to wipe the surface, or rubbing it
forcefully may cause damage.
• The stand includes a large amount of plastic, so be careful
not to wipe it with benzene, thinner, or other harsh
chemicals, as this may cause deterioration and paint peeling.
• Do not apply insecticide or volatile substances on the stand.
Also, do not leave rubber or vinyl articles in contact with the
base for a long time, as this may cause deterioration and
paint peeling due to the plasticizer in the plastic.