Other speaker connection, Connecting your equipment 02 – Pioneer VSX-2020-K User Manual
Page 9

Connecting your equipment
02
9
En
[D] 5.1 channel surround system & Front Bi-
amping connection (High quality surround)
•
Speaker System setting: Front Bi-Amp
Bi-amping connection of the front speakers for high
sound quality with 5.1-channel surround sound.
[E] 5.1 channel surround system & ZONE 2
connection (Multi Zone)
•
Speaker System setting: ZONE 2
With these connections you can simultaneously enjoy
5.1-channel surround sound in the main zone with stereo
playback on another component in ZONE 2. (The
selection of input devices is limited.)
Important
• The
Speaker System setting must be made if you
use any of the connections shown above other than
[A] (see Speaker system setting on Operating
Instructions in CD-ROM).
• Sound does not come through simultaneously from
the front height, front wide, speaker B and surround
back speakers. Output speakers are different
depending on the input signal or listening mode.
Other speaker connection
• Your favorite speaker connections can be selected
even if you have fewer than 5.1 speakers (except front
left/right speakers).
• When not connecting a subwoofer, connect speakers
with low frequency reproduction capabilities to the
front channel. (The subwoofer’s low frequency
component is played from the front speakers, so the
speakers could be damaged.)
•
After connecting, be sure to conduct the Auto
MCACC (speaker environment setting) procedure.
See Automatically setting up for surround sound
(Auto MCACC) on page 23.
L
R
SL
SW
C
SR
Plan D
Front Bi-Amp
L
L
R
R
SL
SW
C
SR
Main zone
Sub zone
Plan E
ZONE 2
VSX-LX53_QuickGuide_SVYXJ_ENFRDE.book Page 9 Tuesday, February 23, 2010 8:22 PM