Pioneer VSX-2020-K - Manual (Page 27)

Basic playback 04
27
En
Playing a USB device
It is possible to playback files
1
using the USB interface on
the front of this receiver.
1 Switch the receiver into standby then connect your
USB device to the USB terminal on the front panel of
this receiver.
2 Switch on the receiver and your TV. 2
3 Press iPod USB on the remote control to switch the
receiver to the iPod/USB.
3
4 Use / to select ‘Music’ from the USB Top menu.
5 Use / and ENTER to select the track to be
played, then press the  button.
Basic playback controls
• Press iPod USB to switch the remote control to the
USB operation mode.
Listening to the radio
1 Press TUNER to select the tuner.
2 Use BAND to change the band (FM or AM), if
necessary.
3 Tune to a station.
There are three ways to do this:
Automatic tuning – Press and hold TUNE
/ for
about a second. The receiver will start searching for
the next station.
Manual tuning – To change the frequency one step
at a time, press
TUNE /.
High speed tuning – Press and hold TUNE
/ for
high speed tuning. Release the button at the
frequency you want.
Improving FM sound
If the TUNED or STEREO indicator doesn’t light when
tuning to an FM station because the signal is weak, press
MPX to switch the receiver into mono reception mode.
Saving station presets
If you often listen to a particular radio station, it’s
convenient to have the receiver store the frequency for
easy recall whenever you want to listen to that station.
1 Tune to a station you want to memorize.
2 Press T.EDIT (TUNER EDIT).
The display shows PRESET MEMORY, then a blinking
memory class.
3 Press CLASS to select one of the seven classes, then
press PRESET / to select the station preset you
want.
4 Press ENTER.
After pressing ENTER, the preset class and number stop
blinking and the receiver stores the station.
Listening to station presets
1 Press TUNER to select the tuner.
2 Press CLASS to select the class in which the station
is stored.
3 Press PRESET / to select the station preset you
want.
Note
1 • Compatible USB devices include external magnetic hard drives, portable flash memory (particularly keydrives) and digital audio players
(MP3 players) of format FAT16/32.
• Pioneer cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and assumes no responsibility for
any loss of data that may occur when connected to this receiver.
2 Make sure the receiver is in standby when disconnecting the USB device.
3 The iPod/USB function cannot be selected in the main zone when the Internet radio function is selected in the sub zone. Also, the iPod/USB
function cannot be selected in the sub zone when the Internet radio function is selected in the main zone.
MASTER
VOLUME
MCACC SETUP MIC USB
iPod iPhone
VIDEO CAMERA
HDMI 5
CONTROL ON / OFF
USB mass
storage device
iPod CTRL
HOME
MENU TUNE
TUNE TOOLS LIST
PRESET
TOP MENU
BAND GUIDE
T.EDIT
VIDEO
PARAMETER
AUDIO
PARAMETER
ENTER PRESET
RETURN CATEGORY
SIGNAL SEL
S.RETRIEVER
MCACC SLEEP
MIDNIGHT
TV / DTV MPX PQLS
PHASE CTRL STATUS
PGM MEMORY MENU
AUDIO
INFO
DISP
HDD DVD
5 4 6
2 1 3
VSX-LX53_QuickGuide_SVYXJ_ENFRDE.book Page 27 Tuesday, February 23, 2010 8:22 PM