Olympus E-1 - Manual (Page 71)

71
Exposure
5
Auto bracketing
2
Single-frame shooting :
Each time the shutter button is pressed
fully, a picture is taken at a different
exposure.
Sequential shooting :
Hold down the shutter button until the
selected number of frames are taken.
The camera shoots each frame at a
different exposure.
● BKT blinks on the control panel and viewfinder
during auto bracketing.
● The exposure level indicator shows the
exposure compensation value applied to the
next frame.
● Releasing the shutter button stops auto
bracketing shooting.
During auto bracketing
How AE bracketing compensates exposure in each
exposure mode
Depending on the selected exposure mode, exposure is compensated in the following way:
P mode : Aperture value and shutter speed
A mode : Shutter speed
S mode : Aperture value
M mode : Shutter speed
Blinking
Viewfinder
Control panel
All the way down
TIPS
To apply AE bracketing to the exposure value you have compensated:
T Compensate the exposure value, then use the AE bracketing feature. AE bracketing is
applied to the exposure value you have compensated.
If the selected range is beyond the scale of the
exposure level indicator, only the part within the
scale is displayed.
Auto bracketing compensation range
Exposure compensation value you
have adjusted
Auto bracketing compensation range
Exposure compensation value
you have adjusted
When set to exposure compensation +1
To cancel image recording on the card:
~
“REC. CANCEL” (P. 77)
Control panel Viewfinder
Auto bracketing compensation value applied to
exposure value you had compensated