Olympus E-1 - Manual (Page 22)

22
Getting star
ted
1
Attaching a lens to the camera
2
Remove the body cap from the camera.
3
Remove the rear cap from the lens.
4
Align the lens attachment mark (red) on
the camera with the alignment mark
(red) on the lens, then insert the lens
into the camera’s body. Rotate the lens
clockwise until you hear it click.
5
Remove the lens cap.
Body cap
Rear cap
Ⅵ Removing the lens from the camera
1
Make sure the power switch is set to
OFF .
2
While pressing the lens release button,
remove the lens from the camera by
rotating it counterclockwise.
Lens release button
Lens attachment mark (Red)
Alignment mark
(Red)
Lens cap