Xerox WorkCentre XE90fx-9907 - Manual (Page 59)

8.7
U s e r G u i d e
R E P L A C I N G T H E D R U M C A R T R I D G E
8
Hold the tabs on the drum cartridge handle
between your thumbs and index fingers, and
gently pull the drum cartridge up and out in a
circular motion to lift it clear of the
WorkCentre.
Caution: The new drum cartridge is sealed
with a sheet of black protective paper to
shield the drum from light. To prevent
damage to the drum surface, do not remove
the protective paper until you have inserted
the cartridge into the WorkCentre.
Remove the new drum cartridge from the
plastic bag and set it down on a clean,
uncluttered and level surface.
Place the used cartridge into the empty bag,
and seal the bag.
Hold the tabs on the new drum cartridge
handle between your thumbs and index
fingers. Slide the drum cartridge along the
runners into the WorkCentre.
6
7
8
9
XE90QRG.BK Page 7 Wednesday, January 5, 2000 9:55 AM