Xerox WorkCentre XE90fx-9907 - Manual (Page 56)

8.4
U s e r G u i d e
R E P L A C I N G T H E T O N E R C A R T R I D G E
Replacing the Toner Cartridge
If you notice that the print quality
is becoming more and more faint, remove
the toner cartridge and shake it gently
from side to side to distribute the toner
evenly through the cartridge. If there are
thin lines around the toner cartridge
roller, it is probably time to replace the
toner cartridge. The order number for
the toner cartridge is
6R916.
Open the front door by pushing in on the
front door latches on each side of the front
door.
Gently pull out the toner cartridge as
shown below. The toner cartridge will
slide out along the runners. Do not pull it
all the way out of the WorkCentre.
When the toner cartridge is near the end
of the runners, hold the handle to support
the toner cartridge, and then pull it clear
of the WorkCentre.
1
2
3
XE90QRG.BK Page 4 Wednesday, January 5, 2000 9:55 AM