Xerox WorkCentre XE90fx-9907 - Manual (Page 51)

7.3
U s e r G u i d e
C L E A N I N G T H E D R U M C A R T R I D G E
7
Cleaning the Drum Cartridge
If some of the print is missing, or black spots
appear, you may need to clean the surface of
the drum. Otherwise, it may become
damaged and will have a serious effect on the
print quality.
Caution: Because the drum surface is very
sensitive, you must take extreme care when
cleaning it.
• Do not let the drum surface come into
contact with fingerprints, water, alcohol
or other solvents that will damage the
drum surface.
• Do not touch the drum surface with the
edges of the rolled-up paper (see step #4,
page 7.4).
To clean the drum surface
Unplug the power cord.
Remove the toner cartridge. (Refer to
Replacing the Toner Cartridge).
Remove the drum cartridge. (Refer to
Replacing the Drum Cartridge).
1
2
3
XE90QRG.BK Page 3 Wednesday, January 5, 2000 9:55 AM