Xerox WorkCentre XE90fx-9907 - Manual (Page 52)

7.4
U s e r G u i d e
S E R V I C E
Take a sheet of clean paper and roll it into
a tube. Roll it tightly so that the diameters
of the holes at each end are less than the
thickness of your little finger.
Holding the drum cartridge as shown,
gently rub the surface of the drum with
the rolled-up paper to remove any
particles of toner caking on the drum into
a wastebasket or onto a prepared surface.
Replace the drum cartridge.
Replace the toner cartridge.
Service
It is important that you speak with a
service representative to resolve any
persistent problem. The service
representative will direct you as to what
action must be taken.
The WorkCentre cannot be shipped for
service without the authorization of a
service representative.
For frequently asked questions, visit the
Xerox Web site at: http://www.xerox.com
or call our experts at:
1 - 800 - TEAM - XRX (1 - 800 - 832 - 6979)
4
5
Note: Be sure to hold the rolled-up
paper at a right angle to the cartridge.
6
7
XE90QRG.BK Page 4 Wednesday, January 5, 2000 9:55 AM