Xerox WorkCentre XE90fx-9907 - Manual (Page 34)

3.10
U s e r G u i d e
G E N E R A T I N G A C O V E R S H E E T A S A D E F A U L T
Generating a Cover Sheet as a
Default
To select a cover sheet as a default:
Press Menu then 4.
Press 1 then 3.
Select and press 1.
Press Stop/Exit two times.
Note: Use this procedure to select cover
sheet as a default. The Auto Cover Sheet
function will send a cover sheet with
every fax transmission unless you turn
it off. No message is included on the
cover sheets generated by the Auto
Cover Sheet function.
1
2
3
4
Note: The receiver's name must be
programmed in either the Rapid Key or
Speed Dial function for it to appear on
the Auto Cover Sheet.
XE90QRG.BK Page 10 Wednesday, January 5, 2000 9:55 AM